All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy S3 SHV-E210L running E210LKLUKNI3 4.4.4 KitKat firmware.
Steps to Root Galaxy S3 SHV-E210L Running E210LKLUKNI3 4.4.4 KitKat through Odin:
- download CF-Auto-Root for Galaxy S3 E210L and extract the Zip file CF-Auto-Root-c1lgt-c1lgt-shve210l.zip
- Now, Switch off your phone and boot Galaxy S3 E210L into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy S3 E210L to your computer via USB Cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, click on the AP button and select the E210L_cambodiarom_Seyha.tar
- Click on the Start button to begin the process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- Now, click on the AP button and select the CF-Auto-Root-c1lgt-c1lgt-shve210l.tar.md5 file.
- Finally, click on the Start button to begin the rooting process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- After finishing you have to remove korian Application using : Uninstall
- Uninstall, system application using Uninstall
- Finally, U have to install SuperSU Application using : SuperSU
- Finish.
- If you want to change service mode type *#9090# and then click Network Mode Set and click WCDMA_Enable.
(for other samsung firmware you can download from here : samsung firmware)
This comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeletehey bro,,,
ReplyDeleteUSB cable OK, drivers OK. all correct,but odin fail when flashing "userdata.img".
what is that error?
Added!!
Odin v.3 engine (ID:6)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
sboot.bin
cache.img
hidden.img
modem.bin
recovery.img
system.img
tz.img
userdata.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Machan mn gehuwamath oka wetuna me frimware ekata,mage tibba aula data on weti ekai ekata gahanna giye eth failed wenawa,uba eka hadagattada,
Deletedata on wennene kohomawath
ReplyDeleteS3 eke data network eka fix kalada
DeleteData on wenne neththe ai bn?settings (java) dila save kalama harinam weda krnna ona neda?eth machan origenal korian ekatawath data on wen neh
ReplyDeleteSHV E210L jara godak bro,
ReplyDeleteuserdata.img
ReplyDeleteFAIL!
what to do?
fuckin man it's not working. userdata.img failed ./.
ReplyDelete